ASMxxxx Series User’s Manual
Asia Pacific | EMEA | Americas 133
10.53 Maintenance – Configuration Files
Configurations for the ASM may be stored in a list within the ASM and loaded or saved to a nominated computer drive if desired.
Note: Due to memory architecture limitations, this feature is not available in “K1” models of the ASM, but configuration files
can be saved from a “K1” model using the Telnet Command Line Interface (CLI). Refer the end of this
section for details.
Note: Access to this screen, and the field accessible on it, may vary based on the Login level used for accessing the ASM.
To Next Page
Loading...