ASMxxxx Series User’s Manual
Asia Pacific | EMEA | Americas 47
10.13 Status – Communications
This page reports the current Communications settings.
Ethernet
MAC Address:
The physical MAC address of the unit.
DHCP:
If the stored value is enabled, the unit will attempt to get its IP Address, Subnet Mask and Gateway settings from a DHCP server. If
a DHCP server cannot be found, the stored settings will be used and the Currently In Use status will show as disabled.
If disabled, the stored values will be used unconditionally.
IP Address:
The Stored and Currently In Use IP address values.
To Next Page
Loading...
General