ASMxxxx Series User’s Manual
Asia Pacific | EMEA | Americas 91
Defaults:
Clicking this resets all data fields to the factory defaults. The default settings are;
Setting Warning Alarm
RxA Peak Level -50dBm -35dBm
RxB Peak Level -50dBm -35dBm
Antenna RxE Peak Level -50dBm -35dBm
Discard Changes:
Click this button to restore the values to those current saved. Note that if invalid values are being displayed after an Apply
attempt, these values may not match the current system configuration. In this case, just select the Configure/User Data menu
item again to re-display the current configuration.
Apply:
This will attempt to save and activate the values entered. If any out of range values are present, nothing will be saved and the
problem settings will be highlighted with a red background.
To Next Page
Loading...
General