RichAuto A11 - Page 57

RichAuto S & T Co., Ltd
Add: 5th floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
52
select defferent file list;
2) Press“ ” to enter, press “ ” and “ ” to select a file, then
press “ ”, system start to read the file.
3) After read the file, press “ ”the screen display line 1 of the code, press
“ ”, prompted “input start number: displays total lines”, input number
of start line and press “ ”to confirm, if input wrong number, just press
“ ” to delete it.
4) Press“ ”again, to set the end line, the screen displays “input end
number”, press“ ”the screen save the changed start line number, press
“ ”, Input end line in cursor, press “ ” to confirm,
press“ ” to modify.
5) Set processing parameters.
5. Calculate bound
Calculate bound means user can check the size of processing, So as to avoid
unnecessary waste of materials and processing errors. The steps are as below:
1) Press “ ” to enter, then press “ ” or“ ”to select file list;
2) Press “ ”get into the file list, and then press “ ” or“ ”to