RichAuto S & T Co., Ltd
Add: 5th
floor, No.4 building, No 4. Yard, life Rd, life science park, beiqing St., changping district Beijing, China
Tel：010-53275118 Fax：010-53275110/53275111 Web site：www.richnc.com.cn
53
choose file.
3) Press “ ”, system start to read the file, after reading the file, the system
will calculate the area.
6. Mill plane
Include two types: scan mill and encircle mill.
Steps are as follows:
1. Scan mill
1) Press “ ” or “ ”to move cursr to choose the mill type.
2) Press “ ” to enter the scan mill set, it includes: Scan type, Width,
Height, Diameter, Depth, Z Step, T Ratio.
3) Press “ ” and “ ”to move cursor on the option which need
modify, press “ ” to choose mill type(X Scan or Y Scan), also press
this button to modify the parameters. Press “ ” after modified all the
parameters to save them.
2. Encircle mill
Scan mill set
Scan type X Scan
Width 100.000
Height 100.000
Diameter 10.000
Depth 0.100
Z Step 0.100
T Ratio 0.800
To Next Page
