Ricoh 2555 - 5. Troubleshooting; If Your Machine Does Not Operate as You Want

Using Connect Copy
241
4
F
FF
F
Enter the required number of prints using the number keys.
Note
❒ Up to 999 can be entered.
❒ To change the value entered, press the {
{{
{Clear/Stop}
}}
} key and enter a new
value.
❒ If you print more than one set using the Sort function, you can check the
print result by printing out only the first set. See ⇒ p.220 “Sample Print-
ing”.
G
GG
G
Press the {
{{
{Start}
}}
} key.
Printing starts after the image data stored in the master unit has been trans-
ferred to the sub-unit.
Note
❒ The printing may take some time after transferring the image data to the
sub-unit.
❒ To stop originals from being printed, press the {
{{
{Clear/Stop}
}}
} key on the mas-
ter unit, then press the [Cancel] key following the instructions on the dis-
play.
❒ The number of sheets and sets printed by the master unit and sub-unit may
be different.
❒ The master unit and sub-unit may not finish printing at the same time.