Settings You Can Change with the User Tools
11
1
Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, see ⇒ p.8 “Accessing the User Tools (Sys-
tem Settings)”.
Basic Page 1
Menu Description
Operation Panel Beeper The beeper (key tone) sounds when a key is pressed.
This beeper can be turned on or off.
Note
❒
Default:
On
Ready Operation Panel
Beeper
Specify whether to sound the beeper when the machine becomes
ready for copying immediately after Energy Saver mode is deacti-
vated or the power is turned on.
Note
❒
If the “Operation Panel Beeper” setting is “Off”, the beeper
does not sound irrespective of the “Ready Operation Panel
Beeper” setting.
❒
Default:
On
Copy Count Display The copy counter can be set to show the number of copies made
(count up) or the number of copies remaining to be made (count
down).
Note
❒
Default:
Up (count up)
MojitoC2b_GBsys_F_FM.book Page 11 Wednesday, July 31, 2002 2:16 PM
To Next Page
