Bit Switches
SM 95 D361
Fax Option
Type 3350
D361
Communication Switch 0B (SP No. 1-104-012)
No Function Comments
4
Printout of the message when
acting as a Transfer Station
0: Disabled, 1: Enabled
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in
from the Requesting Terminal.
5
Action when there is no fax
number in the programmed
Quick/Speed dials which meets
the requesting terminal's own
fax number
0: Transfer is disabled
1: Transfer is enabled
After the machine receives a transfer request,
the machine compares the last N digits of the
requesting terminal's own fax number with all
the Quick/Speed dials programmed in the
machine. (N is the number programmed in
communication switch 0C.)
0: If there is no matching number programmed
in the machine, the machine rejects the
transfer request.
1: Even if there is no matching number
programmed in the machine, the machine
accepts the transfer request. The result report
will be printed at the transfer terminal, but will
not be sent back to the requesting terminal.
6-7 Not used Do not change the settings.
Communication Switch 0C (SP No. 1-104-013)
No Function Comments
0-4
Number of digits compared to
find the requester's fax
number from the programmed
Quick/Speed Dials when
acting as a Transfer Station
00 – 1F (0 to 31 digits)
After the machine receives a transfer request, the
machine compares the own telephone number
sent from the Requesting Terminal with all
Quick/Speed Dials programmed in the machine,
starting from Quick Dial 01 to the end of the
Speed Dials.
This number determines how many digits from the
To Next Page
Loading...
