Facsimile Features
136
4
Note
❒ You can use “Parameter Settings” (switch 10, bit 5) to select whether or not
to print stored received documents. See “Parameter Settings”.
❒ If [Store] is selected and a destination for notification is specified, notifica-
tion of document reception can be sent to the specified e-mail address.
❒ Documents saved on the hard disk are categorized as received and stored
documents.
❒ You cannot change to a different setting if received documents have been
stored on the hard disk. To change to a difference setting, print documents
stored on the hard disk if necessary, and then delete them.
❒ Received confidential documents are stored in memory. Use the Print Con-
fidential RX File function to print them.
❒ With [Store] selected, more memory space is used as the number of saved
documents increases. After memory space becomes insufficient, no more
documents are saved on the hard disk. When this happens, the machine
starts printing then overwriting old documents.
❒ You can store received documents up to a total of approximately 320 pages
or 2,240 pages of A4 size Standard <ITU-T#1Chart>.
❒ You cannot send received documents.
❒ You cannot manage stored documents from the Document Server display.
❒ It is recommended that you use Web Image Monitor running under the
same network environment as this machine. Otherwise, the Web browser
may not open and an error may occur.
Reference
p.147 “Parameter Settings”
“Printing/Deleting Received and Stored Documents (Print/Delete Stored
RX File)”, Facsimile Reference
“Sending Stored Documents”, Facsimile Reference
Reception Report e-mail
When a received document is stored, this report is sent to the e-mail address set
as the destination for notification.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
