Ricoh AFICIO MP C2500 User Manual

System Settings
82
2
Programming the LDAP server
This section explains how to specify the LDAP server settings.
To enter an identification name
A Press [Change] under “Name”.
Register a name for the LDAP server that will appear on the server selection
screen of the LDAP search operation.
B Enter the server’s identification name.
C Press [OK].
To enter a server name
A Press [Change] under “Server Name”.
Register the LDAP server’s host name or IPv4 address.
B Enter the LDAP server name.
C Press [OK].
To enter the search base
A Press [Change] under “Search Base”.
Select a route folder to start the search from e-mail addresses registered in the
selected folder are search targets.
B Enter the search base.
For example, if the search target is the sales department of ABC company, en-
ter “dc=sales department, o=ABC”. (In this example, the description is for an
active directory. “dc” is for the organization unit, and “o” is for the company.)
Search base registration may be required depending on your server environ-
ment. When registration is required, unspecified searches will result in error.
Check you server environment and enter any required specifications.
C Press [OK].
Downloaded From ManualsPrinter.com Manuals

Ricoh AFICIO MP C2500 Specifications

General

Print Technology	Laser
Print Speed (Black)	25 ppm
Print Speed (Color)	25 ppm
Max Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Functions	Print, Copy, Scan
Copy Speed (Black)	25 cpm
Copy Speed (Color)	25 cpm
Duplex Printing	Yes
Processor	400 MHz
Maximum Copy Size	11" x 17"
Zoom Range	25% - 400%
Paper Weight	60 - 163 g/m²
Memory (Maximum)	1 GB
Interface	Ethernet 10/100Base-TX, USB 2.0
PDL	PCL5c, PCL6, RPCS
Power Source	50/60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS