Authentication Information
211
7
Deleting a User Code
This section describes how to delete a user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Press [Delete].
E Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
F Press [Auth. Info].
G Press [Change] to delete the user code, and then press {q} key.
H Press [OK].
I Press [Exit].
J Press the {User Tools/Counter} key.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
