Registering Addresses and Users for Facsimile/Scanner Functions
210
7
D Check that [Program / Change] is selected.
E Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
F Press [Auth. Info].
G Press [Change], and then enter the new user code using the number keys
H Press {q} key.
I To change the available functions, press [Auth. Info] and then press [TNext]
twice.
J Press the key to select the functions to enable them.
Press the key to highlight it, and then the function is enabled. To cancel a se-
lection, press the highlighted key.
K Press [OK].
L Press [Exit].
M Press the {User Tools/Counter} key.
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.205 “Changing a Registered Name”
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
