Registering Addresses and Users for Facsimile/Scanner Functions
224
7
IP-Fax Destination
This section describes how to register a IP-Fax destination.
Note
❒ For details about sending an IP-Fax, “Sending by IP-Fax”, Facsimile Refer-
ence.
Reference
“Sending by IP-Fax”, Facsimile Reference
Registering an IP-Fax Destination
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Select the name whose IP-Fax destination you want to register.
Press the name key, or enter the registered number using the number keys.
F Press [Fax Dest.].
G Press [Select Line], and then select [H.323] or [SIP].
H Press [Change] under ”Fax Destination”.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
