Connecting to the Interfaces
7
1
E Turn on the main power switch of the machine.
A Indicator (green)
Lights up green when the machine is connected correctly to the network.
B Indicator (yellow)
Lights up yellow when 100 BASE-TX is in operation. Goes off when 10
BASE-T is in operation.
Note
❒ For details about installing the printer driver, see “Preparing the Ma-
chine”, Printer Reference.
Reference
“Turning On the Power”, About This Machine
“Preparing the Machine”, Printer Reference
Connecting to the USB Interface
Connect the USB2.0 interface cable to the USB2.0 port.
A Connect the USB2.0 interface cable to the USB2.0 port.
B Connect the other end to the USB2.0 port on the host computer.
AME005S
AMB013S
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
