193
6. Scanner Features
This chapter describes user tools in the Scanner Features menu.
General Settings
This section describes the user tools in the General Settings menu under Scanner
Features.
❖ Switch Title of Quick Dial Table
Select the title to be shown on the destination list.
❖ Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the
delivery server. To use this function, it is necessary to set [Delivery Option] to
[On].
❖ Search Destination
Select a destination list to be used in “Search Destination”.
To search from LDAP server, it is necessary to register the LDAP server in
[System Settings] and set [LDAP Search] to [On].
❖ TWAIN Standby Time
When the machine is being used to send e-mail or a file, or functioning as
Document Server or a network delivery scanner, a scanning request to the
machine as a TWAIN scanner will switch the machine to the network TWAIN
scanner function. This setting determines the delay until the machine switch-
es to the network TWAIN scanner function.
•Off
When [Off] is selected, the machine will switch to the network TWAIN
scanner function at once.
• On: 10 sec.
When [On] is selected, you can enter the delay time with the number keys
(3-30 seconds). The machine will switch to the network TWAIN scanner
function when the time set here passes after the last key operation.
❖ Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select either [E-mail / Folder] or [Delivery Server].
• E-mail / Folder
• Delivery Server
❖ Destination List Display Priority 2
In the machine’s address book, select which address book appears by default.
You can select either [E-mail Address] or [Folder].
• E-mail Address
•Folder
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
