Ricoh AFICIO MP C2500 - Tray Paper Settings

Tray Paper Settings
49
2
Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Important
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
• Tray 1
•Tray 2
•Tray 3 (optional)
•Tray 4 (optional)
When optional paper tray unit is installed, [Tray 3] and [Tray 4]is displayed.
When optional LCT is installed, [Tray 3] is displayed.
❖ Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
• Tray 1
•Tray 2
•Tray 3 (optional)
•Tray 4 (optional)
When optional paper tray unit is installed, [Tray 3] and [Tray 4]is displayed.
When optional LCT is installed, [Tray 3] is displayed.
❖ Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
• Tray 1
•Tray 2
•Tray 3 (optional)
•Tray 4 (optional)
When optional paper tray unit is installed, [Tray 3] and [Tray 4]is displayed.
When optional LCT is installed, [Tray 3] is displayed.
Downloaded From ManualsPrinter.com Manuals