Ricoh AFICIO MP C2500 - Program; Change;Delete LDAP Server

Administrator Tools
81
2
Program / Change/Delete LDAP Server
This section explains how to specify the LDAP server settings.
To program/change the LDAP server
A Press [System Settings].
B Press [Administrator Tools].
C Press [Program / Change / Delete LDAP Server].
D Check that [Program / Change] is selected.
E Select the LDAP server you want to program or change.
When programming the server, select [Not Programmed].
F Set each item as necessary.
G Press [OK] after setting each item.
For details about LDAP server, see “Programming the LDAP server”.
H Press [Exit].
I Press the {User Tools/Counter} key.
Reference
p.82 “Programming the LDAP server”
To delete the programmed LDAP server
A Press [System Settings].
B Press [Administrator Tools].
C Press [Program / Change / Delete LDAP Server].
D Press [Delete].
E Select the LDAP server you want to delete.
F Press [Yes].
G Press [Exit].
H Press the {User Tools/Counter} key.
Downloaded From ManualsPrinter.com Manuals