Registering SMTP and LDAP Authentication
263
7
Registering SMTP and LDAP Authentication
SMTP Authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.
Important
❒ When [Do not Specify] is selected for SMTP Authentication, the User Name and
Password that you have specified in SMTP Authentication of File Transfer
settings applies. For details, see “File Transfer”.
A Press [System Settings].
B Press [Administrator Tools].
C Press [Address Book Management].
D Check that [Program / Change] is selected.
E Press the name you want to register or enter the registered number using
the number keys
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
F Press [Auth. Info].
G Press [Specify Other Auth. Info] on the right side of SMTP Authentication.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
