Facsimile Features
164
4
L Enter the vertical size of the paper using the number keys, and then press
the {q} key.
Specify a vertical size from 210 mm (8.3”) to 297 mm 11.6”). You cannot enter
a size smaller than 210 mm or larger than 297 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).
M Enter the horizontal size of the paper using the number keys, and then
press the {q} key.
Specify a horizontal size from 148 mm (5.9”) to 600 mm (23.7”). You cannot
enter a size smaller than 148 mm or larger than 600 mm.
Each time you press [mm] or [inch], the units switch between “mm” and
“inch”. If you enter a length and change the units by pressing [mm] or [inch],
it is converted automatically (fractions are rounded off).
N Press [OK].
O Press [Exit].
P Press the {User Tools/Counter} key.
Note
❒ If you select [Auto Detect], the machine recognizes the paper size automati-
cally.
Reference
“Reception Settings”, Facsimile Reference
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
