Connecting the Machine
14
1
Note
❒ IPv6 can be used only for the printer function.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.56 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 1394 interface cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒ [IEEE 1394]appears when IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.56 “Interface Settings”
Interface Settings/Network
Permit SNMPv3 Communication As required
Interface Settings/Network
Permit SSL/TLS Communication As required
Interface Settings/Network
Host Name As required
Interface Settings/Network
Machine Name As required
Menu User Tool Setting Requirements
Interface Settings/IEEE 1394
IPv4 Address Neccessary
Interface Settings/IEEE 1394
DDNS Configuration As required
Interface Settings/IEEE 1394
Host Name As required
Interface Settings/IEEE 1394
Domain Name As required
Interface Settings/IEEE 1394
WINS Configuration As required
Interface Settings/IEEE 1394
IPv4 over 1394 Neccessary
Interface Settings/Network
IPv4 Gateway Address As required
Interface Settings/Network
DNS Configuration As required
Interface Settings/Network
Effective Protocol Neccessary
Menu User Tool Setting Requirements
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
