Connecting the Machine
18
1
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [SMTP Server] and [Fax E-mail Account] must be specified in order to use the
send function.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3 / IMAP4 Settings].
❒ When [SMTP Authentication] is set to [On], also make setting for [Administrator's
E-mail Address].
❒ [E-mail Communication Port] and [Fax E-mail Account] must be specified in order
to use the reception function.
❒ When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail
Communication Port].
Reference
p.56 “Interface Settings”
p.66 “File Transfer”
File Transfer Administrator's E-mail Address As required
File Transfer E-mail Communication Port Neccessary
File Transfer E-mail Reception Interval As required
File Transfer Max. Reception E-mail Size As required
File Transfer E-mail Storage in Server As required
File Transfer Program / Change / Delete E-mail
Message
As required
File Transfer Fax E-mail Account Neccessary
Menu User Tool Setting Requirements
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
