Tray Paper Settings
53
2
Note
❒ The paper guide for the optional LCT is fixed for A4K, 8
1
/
2
”×11”K size pa-
per. Contact your service representative if you need to change the paper size.
❒ When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy. If one of the trays is specified
as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒ A mark appears next to the paper tray if [Off] is selected in [Auto Paper Se-
lect].
❒ [Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
❒ Functions using the cover sheet tray setting are the front cover function and
front/back cover function.
❒ If you set “Display Time” to “At Mode Selected” in “Cover Sheet Tray” and
“Slip Sheet Tray”, the trays selected for the cover sheets and slip sheets are in-
dicated only if you have enabled the use of cover sheets and slip sheets.
Reference
“Covers”, Copy/ Document Server Reference
“Slip Sheets”, Copy/ Document Server Reference
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
