Ricoh AFICIO MP C2500 - Page 79

File Transfer
71
2
❖ Program / Change / Delete E-mail Message
You can program, change, or delete the e-mail message used when sending
an Internet fax or scan file as an attachment.
• Program / Change
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete E-mail Message].
E Press [Program / Change].
F Press [Not Programmed].
G Press [Change].
H Enter a name, and the press [OK].
Enter the name using up to 20 characters.
I Press [Edit].
To start a new line, press [OK] to return to the e-mail message screen,
and then press [T] in “Select Line to Edit:”.
J Enter the text, and then press [OK].
Enter up to five lines of text. Each line can consist of up to 80 characters.
K Press [OK].
L Press [Exit].
• Delete
A Press [System Settings].
B Press [File Transfer].
C Press [TNext].
D Press [Program / Change / Delete E-mail Message].
E Press [Delete].
F Select the e-mail message to delete.
The confirmation message about deleting appears.
G Press [Yes].
Downloaded From ManualsPrinter.com Manuals