1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select the user of the registered folder you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.
6. Press [Folder].
7. Select "Connection Type".
If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a
NetWare server, press [Bindery].
8. Specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the
network.
9. Press [Connection Test] to check the path is set correctly.
10. Press [Exit].
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Changing a Registered Name".
• p.250 "Changing a Registered Name"
Registering Folders
297
To Next Page
Loading...
