Loading Paper
55
4
Loading envelopes
CAUTION:
Important
❒ Before printing on envelopes, make sure to lower the levers on the printer
rear, inside the rear cover, to avoid envelopes coming out creased. Also, raise
the levers back to their original positions after printing. Leaving the levers
lowered can cause print quality problems when printing on paper other than
envelopes.
❒ Avoid using self-adhesive envelopes. They may cause printer malfunctions.
❒ Check there is no air in the envelopes before loading.
❒ You can print on envelopes with flaps folded or unfolded. When using enve-
lopes with flaps folded, check that the flaps are folded properly.
❒ Load only one size and type of envelope at a time.
❒ Before loading envelopes, flatten their leading edges (the edge going into the
printer) by running a pencil or ruler across them.
❒ Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
❒ Print quality on envelopes may be uneven if parts of an envelope have differ-
ent thicknesses. Print one or two envelopes to check print quality.
❒ In a hot and humid environment, the envelope might be output creased or im-
proper printing quality.
A Open the bypass tray.
• The inside of this machine becomes very hot. Do not touch parts labelled
“v” (indicating a hot surface).
BXG050
To Next Page
Loading...
