The left home position switch remained on 300 ms after the cutter motor switched
on.
• Cutter motor 1 harness loose, broken, defective
• Cutter motor overload due to physical obstruction
• Cutter motor 1 defective
SC593 B
Cutter 1 home position error 3: Upper Tray
The home position switch remains off for 1 sec. after cutter motor 1 switches on.
• Cutter motor 1 harness loose, broken, defective
• Cutter motor 1 overload due to physical obstruction
• Cutter motor 1 defective
SC594 B
Cutter 2 home position error 1: Lower Tray
Both left and right cutter HP switches were on:
Immediately after the machine was turned on.
-or-
After the upper tray was opened and close.
• Right or left cutter home position switch defective.
SC595 B
Cutter 2 home position error 2: Lower Tray
The left home position switch remained on 300 ms after the cutter motor switched
on.
• Cutter motor 1 harness loose, broken, defective
• Cutter motor overload due to physical obstruction
• Cutter motor 1 defective
SC596 B
Cutter 2 home position error 3: Upper Tray
The home position switch remained off for 1 sec. after cutter motor 1 switched on.
• Cutter motor 1 harness loose, broken, defective
• Cutter motor 1 overload due to physical obstruction
• Cutter motor 1 defective
SC Tables
51
To Next Page
Loading...
