SC634 B
Key/card counter device error 3 GW
The backup battery of the counter device RAM is low.
• Replace the RAM backup battery.
SC635 B
Key/card counter device error 4 GW
After installation of the device, a message alerts user to a battery voltage abnormal
error.
• Device control board defective
• Device control board backup battery defective
SC636 B
Expansion recognition module error GW
An error has occurred while trying to access the file of the expansion recognition
module.
• DESS module does not exist on SD card
• External expansion recognition module does not exist on SD card
• SD card damaged
• External expansion recognition file corrupted
SC641 B
Engine-to-controller communication error: No response GW
The controller sent a frame to the main machine engine but there was no response
as demanded by RAPI protocol. The frame was sent 3 times at 100 ms intervals. This
SC was issued after the 3rd attempt failed.
• Examine the connection between the controller and the engine board.
• Replace the engine board if the error is frequent.
SC650 B
Cumin-M communication error GW
An error occurred with the Cumin modem (dialup, modem port) when the machine
was switched on.
• The settings for @Remote SP5816 are incorrect
• Modem disconnected from the phone line
• Modem port disconnected
SC Tables
53
To Next Page
Loading...
