Type Mode Range(%) Default(%) Step (%)
43 3
44 4
45 5
SP1916-51 to -53 Settings Table
Source Range (%) Default (%) Step (%)
51 Roll
-5 to +5 0 0.1
52 Bypass
53 Cassette
1917 Side-to-Side Registration Offset
The center of the paper cassette is the reference point for the alignment of all paper sizes in
the paper cassettes. However, the amount of skew can be different for some paper sizes due
to the positions of the side fences and the number of feed rollers that touch the paper.
• After buckle adjustment, the machine corrects skew in the main scan direction (side-to-
side) based on the size of the paper.
• Based on the settings of SP1002-3, -4, this SP sets the amount of offset for the paper
sizes.
• This is a mechanical adjustment that is stored before execution. This adjustment is done
for paper wider than 400 mm (in the main scan direction) after the adjustments of
SP1002 003, 004 have been done.
SP1917 Settings Table
Source Width (mm) Range Default Step (mm)
30
Cassette-1
230
-5 to +5 0 0.1
31 310
32 400
40
Cassette-2
230
-5 to +5 0 0.1
41 310
System Service Mode
89
To Next Page
Loading...
