This SP displays and selects the Embedded RC Gate connection method.
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
61
Cert. Expire Timing (DFU)
Proximity of the expiration of the certification.
62 Use Proxy
This SP setting determines if the proxy server is used when the machine communicates with
the service center.
63
Proxy Host
This SP sets the address of the proxy server used for communication between Embedded RC
Gate-N and the gateway. Use this SP to set up or display the customer proxy server address.
The address is necessary to set up Embedded RC Gate-N.
Note: The address display is limited to 128 characters. Characters beyond the 128
character are ignored.
This address is customer information and is not printed in the SMC report.
64
Proxy Port Number
This SP sets the port number of the proxy server used for communication between Embedded
RC Gate-N and the gateway. This setting is necessary to set up Embedded RC Gate-N.
Note: This port number is customer information and is not printed in the SMC report.
65
Proxy User Name
This SP sets the HTTP proxy certification user name.
Note: The length of the name is limited to 31 characters. Any character beyond the 31st
character is ignored. This name is customer information and is not printed in the SMC report.
66
Proxy Password
This SP sets the HTTP proxy certification password.
Note: The length of the password is limited to 31 characters. Any character beyond the 31st
character is ignored. This name is customer information and is not printed in the SMC report.
67
CERT: Up State
Displays the status of the certification update.
System Service Mode
167
To Next Page
Loading...
