2 An SSL error notification has been issued. Issued after the certification has expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
69
CERT: Up ID
The ID of the request for certification.
83
Firmware Up Status
Displays the status of the firmware update.
84
Non-HDD Firm Up
This setting determines if the firmware can be updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
85
Firm Up User Check
This SP setting determines if the operator can confirm the previous version of the firmware
before the firmware update execution. If the option to confirm the previous version is selected,
a notification is sent to the system manager and the firmware update is done with the firmware
files from the URL.
86
Firmware Size
Allows the service technician to confirm the size of the firmware data files during the firmware
update execution.
087
CERT: Macro
Displays the macro version of the @Remote certification.
88
CERT: PAC
Displays the PAC version of the @Remote certification.
89
CERT: ID2 Code
System Service Mode
169
To Next Page
Loading...
