Ricoh DD 4450 - 2 X SP Mode Table: T;H Swinging and Scanning Adjustments

SP Table
SM Appendix 15 C279
Appendix:
Service
Program
Mode Tables
2-57
T/H Energy Control: A4 (Fine)
[0 to 50 / 7 / 1%]
Initial value is 7%.In this case, that means thermal head energy can be up to
93% in printing mode(A4 density) (100-7=93%).
2-58
T/H Energy Control: Eco: A4
(Fine)
[0 to 50 / 15 / 1%]
Initial value is 15%.In this case, in economy printing mode (A4 density) means
that an additional 15% reduction will be thermal head energy. Thermal head
energy in 78% maximum. (100-7-15=78%)
2-60
Bold letter mode
[ ON-OFF / OFF / -]
Makes a bold outline of a letter-mode image.
2-61
Scanning shade on margin adj
[0 to 1 / 0 / 1]
This function specifies whether to remove shades from the original when
scanning.
 0: If an original is scanned while it is being pressed, This produces the same
level of image quality as when the predecessor unit is used.
 1: If an original is scanned while it is not being pressed, shades are output.
This produces the same level of image quality as when the predecessor unit
is used.