5.Troubleshooting
153
System Software Installation (USB Method)-3
Symptom:
The LED on the E-25C shows error codes EE 11. EE 11....
Possible cause:
Failed to retrieve product information. It is not E-25C.
Suggested action:
If the E-25C is found, the hardware might not have initialized properly to retrieve the product name.
System Software Installation (USB Method)-4
Symptom:
The LED on the E-25C shows error codes EE 02. EE 02....
Possible cause:
This is not a supported Controller.
Suggested action:
Product information is found, but the installer does not support this product.
System Software Installation (USB Method)-5
Symptom:
The LED on the E-25C shows error codes EE 09. EE 09....
Possible cause:
HDD is missing.
Suggested action:
Check the E-25C to verify the HDD installation.
System Software Installation (USB Method)-6
Symptom:
The LED on the E-25C shows error codes EE 43. EE 43....
Possible cause:
Failed to format the HDD.
Suggested action:
Replace the HDD.
System Software Installation (USB Method)-7
Symptom:
The LED on the E-25C shows error codes EE 44. EE 44....
Possible cause:
The USB device may have a corrupted image file, or your HDD cannot be accessed.
To Next Page
Loading...
Need help?
General
