Ricoh E-25C User Manual

4.System Maintenance
82
4. System Maintenance
General Notes and Cautions
You may use one of the following when you have problems with the system software or the HDD.
Clear Server:
Deletes all queued print jobs from the E-25C.
Restore Default Fiery Settings (Configure) /Factory Defaults (Operation Panel):
Returns customized configuration settings to the default settings. System patches and items created
and registered via Command WorkStation will remain.
Restore Factory Default Image:
Restores the E-25C factory default image using the image stored in the E-25C internal HDD or external
USB flash drive. All Setup configurations as well as all custom files, jobs, logs, and templates stored on
the E-25C HDDs are deleted. Factory default image can also be backed up on a USB flash drive [Link
to Backup/Restore]. It is recommended to store the factory backup image on an external device such as
a USB device.
System Software Reinstallation/Upgrade:
Reinstalls the E-25C system software either from a USB flash drive or a Windows Computer over
network. All Setup configurations as well as all custom files, jobs, logs, and templates stored on the E-
25C HDDs are deleted.
Backup/Restore:
Backs up the customized E-25C system image to the internal HDD or an external USB flash drive and
restores them as necessary. [Link to Backup/Restore]
The following table shows whether the data on the E-25C will remain or be deleted when each of these
features are used.
Clear Server
Restore Default
Fiery Setting
(Configure)
Factory
Defaults
(Operation
Panel)
Restore
Factory
Default
Image
System
Software
Reinstallation /
Upgrade
Operation
Command
WorkStation
Configure
Operation
Panel
Service
Switch
Operation Or
WebTools
Network
Installation
USB
Installation
Instruction
[Link to
Configuration and
[Link to
[Link to
[Link to

Ricoh E-25C Specifications

General

Brand	Ricoh
Model	E-25C
Category	Printer Accessories
Language	English