1.Installation
48
corrupted and Fiery system
software must be
reinstalled.
Error <number>
The license activation
software module is
corrupted. Reinstall
Command WorkStation and
try again.
Reinstall Command WorkStation and try again.
On Windows, go to Control Panel > Add or Remove
Programs and start Fiery User Software in maintenance
mode. Select the Repair option and then select
Command WorkStation.
On Mac OS, use Fiery Software Uninstaller to uninstall
Command WorkStation, and then reinstall Command
WorkStation.
Sorry we cannot deactivate
the option requested.
Please contact support for
more information.
Try to restore Fiery options and deactivate again. If the
error still occurs, contact technical support.
Sorry we cannot reactivate
the option requested.
Contact support for more
information.
Try to restore Fiery options and reactivate again. If the
error still occurs, contact technical support.
None of the options could
be restored.
No previously activated licenses were found for this
computer. If you had licenses that were previously
activated, contact technical support.
Error messages and recommended actions: From the EFI licensing server:
The LAC is not recognized. Check
that you entered the correct LAC.
Refer to the LAC card if you have
one.
The LAC is not recognized. Check that you entered
the correct LAC. Refer to the LAC card if you have
one.
This option is already activated.
Check that the LAC is correct for the option that
you want to activate.
The license has already been
activated for another computer.
The license has already been activated for another
computer.
You can deactivate the license on the other
computer and then activate it on this one.
You must first choose the Request
You submitted the wrong request file or the request
To Next Page
Loading...
Need help?
General
