3.Replacement
62
bag.
If you remove an electronic component from the printer, immediately place it in an antistatic bag.
Power cable
Observe the following guidelines:
Only use the power cable that shipped with the E-25C or an appropriate replacement power cable.
For replacement parts, see your authorized service support center.
Before you open the E-25C, unplug the E-25C.
Keep the power cable away from foot traffic.
Do not place objects on the power cable.
Do not plug the E-25C into a 2-hole, ungrounded power outlet by means of a 3-prong adapter.
Do not plug the E-25C into a circuit connected to heating or refrigeration equipment (including a
water dispenser).
Do not plug the E-25C into a switchable power outlet.
Do not pull the cable to unplug the E-25C. Instead, pull the plug.
Do not tamper with or disable the power cable grounding plug.
Do not use an extension cord.
To Next Page
Loading...
