BIT SWITCHES 30 November, 1999
4-36
G3 Switch 0C
FUNCTION COMMENTS
0
1
Pulse dialing method
Bit 1 Bit 0 Setting
0 0 Normal (P=N)
0 1 Oslo (P=10 - N)
1 0 Sweden (N+1)
1 1 Not used
P = Number of pulses sent out, N = Number
dialed.
2
Not used Do not change these settings.
3 Ring detection method
0: Ringing
1: CNG (Germany only)
0: The machine starts to look for CNG as soon
as it detects off hook in auto reception mode.
1: The machine starts to look for CNG as soon
as it detects ringing in auto reception mode.
Note: This bit should be set to ”1” only in
Germany.
4-7
Not used Do not change these settings.
G3 Switch 0D - Not used (do not change these settings)
G3 Switch 0E - Not used (do not change these settings)
G3 Switch 0F - Not used (do not change these settings)
To Next Page
Loading...
