Ricoh FAX2000L - Image Adjustment; Overview

30 November, 1999 IMAGE ADJUSTMENT
6-25
Replacement
Adjustment
6.11 IMAGE ADJUSTMENT
6.11.1 OVERVIEW
This section explains how to adjust the scanning and printing parameters.
Among these are the margin parameters shown in the diagram below, which are
named in accordance with the following table.
Parameters Description Adjustable by
Scanning Printing
W1 Left margin Adjustable Adjustable
W2 Print/Scan width Not adjustable Not adjustable
L1 Top margin Adjustable Adjustable
L2 Print/Scan length Not adjustable Not adjustable
L3 Bottom margin Adjustable Not adjustable
ø
CAUTION
The factory settings may not be the same as the “Initial settings” described in the
following procedures. The RAM reset level 0 will reset all the scan and print
margin parameters to the “Initial settings.”
W1 W2
L1L2L3
H545R650.WMF