SCANNER 30 November, 1999
6-4
C: Scanner Cover (2 screws, 2 hooks)
6.3.2 SCANNER MOTOR
First, remove the clamp [E].
A: Scanner Motor Assembly (2 screws)
B: FCU Cover (2 screws, PC Interface Cover [D])
C: Scanner Motor (2 screws, 1 connector)
NOTE:
After replacing the Scanner Motor Assembly, bring the wire mesh cover
around harness [F] into contact with bracket [G] using the new clamp [E].
H545R519.WMF
H545R522.WMF
[C]
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
