30 November, 1999 OTHERS
6-21
Replacement
Adjustment
6.9.3 REGISTRATION ROLLER
First, remove the Main Frame (see section 6.8.1).
A: Right Bracket (5 screws, 2 grounding wire)
NOTE: When replacing the Right Bracket [A], do not forget to put back the
coupled gear [B] and microswitch [C].
Remove the Rear Lower Cover, then stand the Main Frame on its side, as shown.
NOTE: Do not let the gears drop while standing the Main Frame on its side.
D: Registration Roller (1 coupled gear, 1 gear, 2 bushings, 1 plastic clip, and a one-
way clutch gear)
H545R538.WMF
H545R539.WMF
[D]
[A]
[B]
[C]
To Next Page
Loading...
