Ricoh FAX2000L - Printer Parameters

30 November, 1999 IMAGE ADJUSTMENT
6-27
Replacement
Adjustment
Parameter Formula
RAM
Address
Unit
Initial
Setting
L2
Not adjustable
L3
This parameter changes the number of
scanner motor steps after the scan line
sensor is activated.
To increase the margin by x mm:
New setting = Current setting + 7.7x
To decrease the margin by x mm:
New setting = Current setting - 7.7x
8002B8(H)
(low)
8002B9(H)
(high)
mm
7.7
1
9B(H)
[155(D)]
6.11.3 PRINTER PARAMETERS
1. Margins (Main Scan Direction)
Parameter Formula
RAM
Address
Unit
Initial
Setting
W1
H545R648.WMF
To increase the margin by x mm:
New setting = Current setting
+ x/0.5 (or 0.34)
To decrease the margin by x mm:
New setting = Current setting
- x/0.5 (or 0.34)
When the user sets the margin in the
main scan direction with a User
Function, the margin is added to this
setting.
Standard
cassette:
80036B(H)
Optional
paper feed
unit:
80036C(H)
Optional
multi-
purpose
feeder:
800370(H)
0.5
mm
(Fax)
0.34
mm
(print
er)
08(H)
08(H)
07(H)
W2
Not adjustable