SYSTEM FEATURES 30 November, 1999
2-34
Reduction Disabled
If bit 0 of printer switch 03 is at 0 (Disabled), the data will not be reduced. In
addition, if the incoming page is up to x mm longer than the copy paper, the excess
portion will not print. The setting of bits 4 to 7 of printer switch 03 determine the
value of x, somewhere between 0 to 15 mm.
Hex value Value of X
00
01
and so on until
F15
Messages more than x mm longer than the copy paper will print out on two pages
in accordance with the setting of bit 1 of printer switch 00, as explained earlier.
To Next Page
Loading...
