Ricoh FAX2000L - Page 95

BIT SWITCHES 30 November, 1999
4-28
Communication Switch 0E
No FUNCTION COMMENTS
0
to
7
Minimum interval between
automatic dialing attempts
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine
waits before it dials the next destination.
Communication Switch 0F - Not used (do not change any of these settings)
Communication Switch 10
No FUNCTION COMMENTS
0
to
7
Memory transmission:
Maximum number of dialing
attempts to the same
destination
01 - FE (Hex) times
Communication Switch 11
No FUNCTION COMMENTS
0
to
7
Immediate transmission:
Maximum number of dialing
attempts to the same
destination
01 - FE (Hex) times
Communication Switch 12
No FUNCTION COMMENTS
0
to
7
Memory transmission: Interval
between dialing attempts to
the same destination
00 - FF (Hex) minutes
Communication Switch 13
No FUNCTION COMMENTS
0
to
7
Immediate transmission:
Interval between dialing
attempts to the same
destination
00 - FF (Hex) minutes
Communication Switch 14 - Not used (do not change any of these settings)
Communication Switch 15 - Not used (do not change any of these settings)
Communication Switch 16 - Not used (do not change any of these settings)