110
Setup Menu
9
Camera User/Admin. Lock Options
Choose the camera functions protected with the passwords selected
using [Camera User Lock Options] or [Camera Admin. Lock Options]
(G P.108). Six options are available; highlight the desired options and
press $ to select or deselect.
Off
Choose this option to allow unrestricted access to all camera functions.
No password is required. Note that administrator passwords can be
used to access all password-protected functions, including those that
are currently only protected with a user password, while functions that
are protected with both an administrator and a user password can only
be accessed with the administrator password. To disable password
protection altogether, select [Off ] for both [Camera User Lock Options]
and [Camera Admin. Lock Options].
Camera
You will be prompted to enter a password when the camera is turned
on. The camera can not be used until you enter the password; if an
incorrect password is entered, the camera will turn off automatically.
Int. Memory
If a memory card is inserted, this option is the same as [Camera]. If no
memory card is inserted, you will be prompted to enter a password
before viewing the images in internal memory (no pictures will be
displayed until the correct password is entered) and when connecting
the camera to a computer or printer (if an incorrect password is
entered, the camera will turn off).
Caution ---------------------------------------------------------------------------------
You will also be prompted to enter a password if you select [Format [Internal
Memory]] after entering an incorrect password. Entering the correct password
will allow you to format internal memory; entering an incorrect password will
cause the camera to exit without formatting internal memory.
To Next Page
Loading...
