Ricoh G800 - Mac os

181
Copying Pictures to a Computer via USB
19
Mac OS
Follow the steps below to copy pictures to your computer.
Caution ---------------------------------------------------------------------------------
If you intend to copy pictures from a memory card, insert the card before
connecting the camera.
1
Select [Mass Storage] for [USB Connection].
• In the setup menu, select [USB Connection] (G P.102), then highlight
[Mass Storage] and press MENU/OK.
2
Turn the camera off.
3
Connect the supplied USB cable to the computer.
4
Connect the cable to the camera.
• The camera will turn on automatically.
5
Copy photos to the computer.
• Copy files from the camera to the
desired location.
• If a memory card is inserted, the
computer will list the files on the
card. Otherwise, the computer will
list the files in internal memory.
6
Disconnect the USB cable when transfer is complete.
• Drag the camera volume into the Trash and then disconnect the USB
cable.