Ricoh G800 - 14 Wireless Networks (G800 SE Only); Connecting to a Wireless Network

137
Wireless Networks (G800SE Only)
14
14 Wireless Networks (G800SE Only)
Pictures can be uploaded from the camera over a wireless Local Area
Network (LAN). Before accessing a wireless network, select [W-LAN]
for [Communication Mode] (GP.122) in the expanded settings menu
(GP.118).
Connecting to a Wireless Network
1
Configure the host device (GP.138).
• Use the supplied ST-10 software to configure the host ftp server.
If desired, the supplied SR-10 software can be used to create an
SR-10 ftp server on your computer exclusively for use by the camera
(G P.145).
2
Create a communication list (GP.148).
• Use ST-10 to create a communication list containing connection
information for the hosts you configured in Step 1.
3
Copy the communication list to the camera (GP.148).
• Connect the camera to the computer using the supplied USB cable
and transfer the communication list to internal memory, or use a
memory card to copy the communication list to the camera (GP.150).
Communication lists can be edited on the camera after transfer
(GP.152).
4
Select [W-LAN] for [Communication Mode].
• Select [W-LAN] for [Communication Mode] (GP.122) in the expanded
settings menu (GP.118).
5
Transfer images.
• Use quick send (GP.158) or the [File Send] option (GP.86) in the
playback menu (GP.84) to transfer images to a host selected from
a list displayed when transfer begins. If desired, the host can be
selected in advance using the [Send To] option (GP.123) in the
expanded settings menu (GP.118).