EasyManua.ls Logo

Ricoh G800 - Two-Touch Transfer

Ricoh G800
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
135
Bluetooth® (G800SE Only)
13
Two-Touch Transfer
To upload your most recent photo:
1
Press $.
A confirmation dialog will be displayed. (If this is the first time you
have used two-touch transfer, you will be asked if you wish to
choose a host; highlight [Yes] and press MENU/OK to display a list of
Bluetooth® devices. Press ! or " to highlight a device and press
MENU/OK. If the desired device does not appear, press ADJ./MEMO
to refresh the list.)
2
Press MENU/OK to begin transfer.
Enter a password if prompted (GP.131).
A progress indicator is displayed
during transfer. A Bluetooth® antenna
icon is displayed while the camera is
connected; when transfer is complete,
the camera will return to shooting
mode without terminating the
connection. The connection can be terminated by selecting playback
mode or turning the camera off.
Note -------------------------------------------------------------------------------------
Two-touch transfer can not be used when [On] is selected for [GPS Lock] (GP.119)
in the expanded settings menu (GP.118).
Unless [BIP] is selected for [Bluetooth Profile] (GP.124) in the expanded settings
menu (GP.118), images are transferred at the size currently selected for [Image
File Size] (GP.124) in the expanded settings menu (GP.118). If [BIP] is selected
and the image file size is larger than the maximum supported by the device,
images will be resized to the maximum supported by the device.
Using the mode dial or the DISP., 6 (Playback), or shutter-release button
interrupts transfer.
4:3 N
4:3 N
4:3 N9999
9999
9999
28
28
28

Table of Contents

Other manuals for Ricoh G800

Related product manuals