Ricoh G800 - Maximizing the Picture Display Brightness

47
If you are using the camera for the first time, read this section.
Note -------------------------------------------------------------------------------------
• When [Shooting Info. Display Frame] is set to [On] in the setup menu, the
shooting information display frame can be displayed for normal symbol display
and histogram display (GP.99).
• Histograms are not displayed in movie mode. A blinking [O] icon, the
recording time, and the time available are displayed during recording even
when indicators are hidden or the grid guide is displayed.
• When [Level Setting] is set to [Level + Shift] or [Level] (G P.48), the level
indicator is displayed during normal symbol display and histogram display
(GP.49).
• When the picture display is off (including when the display has turned off
automatically in synchro-monitor mode), pressing any of the following buttons
turns the picture display on: the MENU/OK, ADJ./MEMO, DISP., 8, 9, 6
(Playback).
During Playback Mode
Normal Symbol Display
Histogram and Detailed
Information Display No Display
2014 / 09 / 01 00:00
2014 / 09 / 01 00:00
2014 / 09 / 01 00:00 F3.5
F3.5
F3.5 1 / 1000
1 / 1000
1 / 1000
000-0001
000-0001
000-0001 0001 / 9999
0001 / 9999
0001 / 9999
4:3 N
4:3 N
4:3 N
2014 / 09 / 01 00:00
2014 / 09 / 01 00:00
2014 / 09 / 01 00:00
000-0001
000-0001
000-0001 0001 / 9999
0001 / 9999
0001 / 9999
4:3 N
4:3 N
4:3 N
Company A
Foundation work
Exterior
Beverly Beech
Gamma Company
Company A
Foundation work
Exterior
Beverly Beech
Gamma Company
Client
Const.type
Location
Supervisor
Affiliates
Client
Const.type
Location
Supervisor
Affiliates
Image Clip
(if present)
Camera Memo
(if present)
Maximizing the Picture Display Brightness
Hold the DISP. button down in shooting mode to maximize the display
brightness in shooting mode. When the brightness is at the maximum
setting, holding the DISP. button down returns the brightness to the
level set in [LCD Brightness] (GP.97).