Ricoh G800 - Page 140

139
Wireless Networks (G800SE Only)
14
3
Click the desired tab.
• In the [Detailed Setups for selections]
dialog, choose from the following
tabs:
- Network: Enter an IP address.
- Wireless LAN: Adjust wireless LAN
settings.
- FTP Send: Adjust ftp settings.
- Dial-up/Mail Config./Address
Book: Not required; the camera
does not support dial-up
connections or e-mail.
- Web Server: Adjust web server
settings (G P.60).
- Auto Update Server: Choose
the SR-10 server for updates
performed using the [Update
Settings] option in the network
menu (G P.129).
- 802.1X Authentication: Adjust
enterprise authentication options.
Note -------------------------------------------------------------------------------------
If the computer is not currently configured for ftp, use the supplied SR-10
software to create an ftp server (GP.145).
4
Click [Add].
• Click the [Add] button under [Setup Name] to display the [New
Name for the Setup] dialog.
5
Enter a name.
• Enter a name for the new configuration and click [OK].
6
Adjust settings.
• Adjust settings as described on P.141. The configuration currently
selected in the [Setup Name] list can be renamed by clicking
[Rename] or deleted by clicking [Delete]. Click [Apply] to save
changes.