Ricoh G800 - Direct Printing; Connecting the Camera to a Printer

169
Barcode Reader (G800SE Only)
16
Note -------------------------------------------------------------------------------------
• The BR-1 is not equipped with a battery or on/off switch. It turns on when the
camera is turned on and turns off when the camera is turned off.
• Turn the camera off before connecting or disconnecting the BR-1.
• The camera can not be used to read barcodes while the BR-1 is connected.
Disconnect the BR-1 to read matrix barcodes.
• The BR-1 can not be used to read password codes when [Barcode] is selected
for [Set/Edit User Password], [Set/Edit Admin. Password] (G P.108), or [Set/Edit
SD Card PW] (G P.112) in the setup menu (GP.95).