2. Select [Regular Size] using the [ ] or [ ] key, and then press the [OK] key.
3. Select the paper size using the scroll keys, and then press the [OK] key.
The "Programmed" message appears.
When copying onto custom size paper
• You should specify the size of copy paper to avoid paper misfeeds.
1.
Select [Paper Size] using the [
] or [ ] key, and then press the [OK] key.
2. Select [Custom Size] using the [ ] or [ ] key, and then press the [OK] key.
3. Enter the horizontal size of the original using the number keys, and then press the [OK]
key.
Copying from the Bypass Tray
47
To Next Page
Loading...
